Midea V8 VRF Series User Manual

V8 VRF Indoor Units
18
Midea
V8
Series VRF Indoor Units
Table 2.1: Wired controller Parameter Settings(continues)
Parameter
Code
Parameter Name
Parameter
Range
Default
Value
Remarks
C06
LED indicator of wired
controller
00: Off
01: On
01
When it is on, LED indicator shows the on/off state of the
indoor unit. When it is off, LED indicator is off.
C07
Wired controller Follow
Me temperature
correction
-5.0 to 5.0°C
Celsius:
-1.0
Note: Accuracy is 0.5°C.
C08
Lower limit of cooling
temperature
16°C to 30°C
16°C
C09
Upper limit of cooling
temperature
16°C to 30°C
30°C
C10
Lower limit of heating
temperature
17°C to 30°C
17°C
C11
Upper limit of heating
temperature
16°C to 30°C
30°C
C12
Set to display 0.5°C
00/01
01
00: No
01: Yes
C13
Wired controller button
light setting
00/01
01
00: Off
01: On
C14
Send configuration
parameters stored in the
wired controller to IDU by
one click
00/01/02/03/04
01
The latest configuration parameters stored in the wired
controller will be changed after power on for two hours or
after configuration parameters of wired controller are
changed.
Note: 1: Applicable to one-to-one scenario
2: Only for 2nd generation IDU
C15
Buzzer of the wired
controller rings
00/01
01
00: No
01: Yes
C16
Backlight time
00/01/02
00
00: 15s
01: 30s
02: 60s
C17
Whether energy
efficiency attenuation is
displayed when power off
00/01
00
00: No
01: Yes
C18
Whether IDU filter
blockage is displayed
when power off
00/01
00
00: No
01: Yes
C19
T1 temperature selection
F0/F1/F2/F3/…#I
DU
F1
F0: IDU T1 temperature sensor
F1: Follow Me, #IDU (IDUs connected to the system,
ranging from 0 to 63)
(Note: The secondary wired controller does not respond to
Follow Me)
F2: Second temperature sensor (reserved) F3: Ground
sensor (reserved)

Midea V8 VRF Series Specifications

General

Brand	Midea
Model	V8 VRF Series
Category	Air Conditioner
Language	English