EN
TROUBLESHOOTING
Possible reason SolutionProblem
No hot or cold
water
Please check the followings before having the machine repaired.
Over consumption of hot or
cold water in short time.
Just wait a moment, then hot
or cold water is available again.
No power supply. Connect plug to socket, turn
on heating or cooling switch.
Noisy operation
No water running
out from taps
Leakage from bottle
supporter
Empty bottle.
Replace it with another one.
Inlet of bottle supporter.
blocked by bottle seal.
Clean out wasted paper&bot-
tle seal, install bottle again.
Broken bottle.
Replace it with a new bottle.
●
●
●
●
●
Not placid installation.
Place the machine on placid &
solid surface.
●
11
To Next Page
Loading...
