MIDIPLUS suggests that you connect directly to your computer built
in USB ports.
1.3 Installation
AKM320-BT do not need other driver to work with a computer, only
needs the USB Audio Driver built in the system.
The first time you connect AKM320-BT to your computer, it will
automatically install the general USB-Audio Driver. After installation,
the system will tell you the "new hardware" is ready to use.
1.3.1 Play with your Application Software
Generally, in PC or Mac, most MIDI software will have a MIDI port
configuration or settings, sometimes it called “MIDI Devices” or
“MIDI Setup”. You can choose and enable your MIDI input and
output devices in it.
If the AKM320-BT driver is properly installed, and there is no other
MIDI device connected, the MIDI In port of AKM320-BT In-1 (or
“Port 1” on the Mac) will be selected as the first midi input, while the
MIDI Out port of AKM320-BT Out-1 (or Port 1) will be selected as
the first midi output.
If the MIDI software runs, and the MIDI-In and Out port in
AKM320-BT are selected, the MIDI message will be received when
playing the AKM320-BT keyboard.
1.4 Power supply
Connect an USB cable from your computer to the AKM320-BT and
To Next Page
Loading...
Need help?
General
