Technical Specifications
Hardware Features
Analog Inputs:
-Microphone & Instrument / Line: 1, In-to-USB &
USB-to-Analog Audio Stereo Out
-XLR Microphone: 2. Balanced w/switch able Phantom Power (+48v)
-Instrument / Line:
2, 1 / 4” Balanced high-impedance
(For electric guitar & bass)
-Input Channel Gain Knob: +40 dB max
Analog Outputs:
-Unbalanced Outs: 2, 1/ 4” (-10 dBV nominal, +1.7 dBV max)
Power USB (no transformer or batteries required)
Audio Performance
Supported Sampling Frequencies (Hz): 44100HZ
Outputs, 1 / 4” & Stereo line:
-Dynamic Range:> 100 dB (typical,-60dB input, A-weighted )
-S / N Ratio: >100 dB (typical, A-weighted )
-THD: -90dB (typical)
Inputs, Inst / Mic:
-Dynamic Range: >90 dB (typical,-60 dB input, A-weighted)
-Signal-to-Noise Ratio: >90dB (typical, A-weighted )
Inputs, Inst / Line:
-Dynamic Range: >90 dB (typical,-60 dB input, A-weighted)
-Signal-to-Noise Ratio: >90 dB (typical, A-weighted )