13
Program key
Pressing MIDI/SELECT button and the Program key, then numeric keys then enter key, you
can select any patch number between 1 to 128. For example, if you want to change voice to
67 (Tenor Sax): Press MIDI/SELECT button and 67 on numeric keys, then enter key and
MIDI/SELECT button again to finish this action.
Assignment of the 16 Real-time Controller (8 faders + 8 knobs)
In order to assign a Controller Knob/Fader to a MIDI Parameter (MIDI Controller) please
follow these steps:
1. press MIDI select then SET CONTROLLER key ( F3 )
2. choice number of knob on ten key group (1 - 8) then press enter
3. assign controller number on ten key group (1-127) then press enter
4. assign act channel number on ten key group (1-16) then press enter
5. Finally, Press MIDI / select key again to finish assign knob.
Now you have assigned to one Control knob the MIDI Parameter and the MIDI Channel.
Repeat the same method for the other 15 Real-time Controller.
To Next Page
Loading...
