Miditech i² Control-61 - Default Setting of the I2 Control-61

9
Default Setting of the ι
ιι
ι ² Control-61
The ι
ιι
ι ² Control-61 will always select the following values for their parameters when the
power is turned on.
*Transmit MIDI Channel no. 1.
*Default After Touch value will be 0
*Default Velocity value will be 0
*Default Reverb Depth value will be 64
*Default Pan Pot value will be 64
*Default Volume value will be 127
*Default CC Data value will be 0
*Default CC no. value will be 0
*Default Control Change (CC-00=0, CC-32=0) message will be transmitted.
*Default Program Change (PG=1) message will be transmitted.
*Real-time Controller 1 - 8 on Midi controller 10 - 18 each on Channel 1