Miditech i² Control-61 - Using the MIDI-Interface

8
Using the USB Midi-Interface
The
ι
ιι
ι ² Control-61 Keyboard has a build in USB MIDI-interface; witch transfers the midi
data from the keyboard to the computer, but also from the computer to the midi-out at the
keyboard.
The booth midi-outs are separate usable, to control a sound expander or maybe an effect
device. In your music program you can set the midi-out-port of the interface as the output of
the keyboard, and also the input-port of the interface as the input of the keys of the keyboard.
If the driver installation is correct, you can use the interface without problems.
If you are using Windows XP or Mac OSX, you can now simply connect the keyboards USB
port with the PC USB port and switch the keyboard´s power switch to the “ON” position.
The
I² Control-61 is is class compliant and will work without any further installation