-
-
-
-
-
-
-
-
-
Non-registered
Bn, XX,
Non-registered
Bn, XX,
Reset controllers
Bn, 123,
Default Mode 1
- Bn, 124,
- Bn, 125,
- Bn, 126,
Set MIDI mode
Change
- Bn, 127,
Notes:
1. ”n” refers to channel number, “pp” refers to program number, “kk” refers to key number,
“vv” refers to one byte data, “cc” refers to control number.
2. There are more controllers besides that listed in the table. Please refer MIDI specification for details
INDEX
Basic Operations 8 Switch on 7
Connections 5 Table of contents 3
Midi Implementation 12 Trouble shooting 9
Midi-Interface 6 USB Driver install 7
Preface 2 USB Interface 6
Secure information 4 Userpanel 5
Specification 11
13
To Next Page
Loading...
