37
Default 1 Modulation
-
-
-
-
-
-
-
-
-
-
-
-
Controller
change
(Definition of the
Modulation
wheel)
Change
-
Bn, cc,
vv
Non-registered
Bn, XX,
Non-registered
Bn, XX,
Reset controllers
Bn, 123,
Default Mode 1
- Bn, 124,
- Bn, 125,
- Bn, 126,
Set MIDI mode
Change
- Bn, 127,
Notes:
1. ”n” refers to channel number, “pp” refers to program number, “kk” refers to key number,
“vv” refers to one byte data, “cc” refers to control number.
2. There are more controllers besides that listed in the table. Please refer MIDI specification for details
3. Mode 1: Omni On, Poly Mode 2: Omni On, Mono
Mode 3: Omni Off, Poly Mode 4: Omni Off, Mono
INDEX
Connexions 29
En cas de problèmes 32
Implémentation MIDI 36
Interface MIDI 30
Interface USB 30
Mise en marche 31
Préfcae 26
Secure Information 28
Spécification techniques 35
Installer les pilotes USB 31
To Next Page
Loading...
