Need help?Do you have a question about the Midland Alan 8001 XT and is the answer not in the manual?
Plan transceiver and microphone bracket placement for convenient operation and secure mounting.
Address ignition noise and select/mount the antenna for optimal performance.
Adjust antenna length using set screws and an SWR meter for optimal resonance.
Cut antenna incrementally, checking SWR after each adjustment for proper length.
Controls for RF Gain, RF Power output, and operating modes (AM, FM, USB, LSB).
Controls for channel selection, band switching, and frequency fine-tuning (Clarifier).
Indicators for RX/TX, frequency display, and a meter for signal strength and SWR.
Connect power supply, external speaker, and antenna to the rear panel ports.
Use the microphone's PTT switch to transmit; proper speaking technique is advised.
Steps for setting up the radio to receive signals, including volume and squelch adjustment.
Steps for selecting a channel and transmitting a clear voice signal.
Understanding and optimizing reception of Single Sideband (SSB) signals.
Enables an audio signal at the end of transmission to notify the listener.
Details product warranty coverage, period, and requirements for claims.
To Next Page
General