Need help?Do you have a question about the Midland ALAN 8001S EURO and is the answer not in the manual?
General| Type | CB Radio |
|---|---|
| Frequency Range | 26.965-27.405 MHz |
| Channels | 40 |
| Modulation | AM / FM |
| Power Output | 4 W |
| Dimensions | 180 x 35 x 140 mm |
| Weight | 1.2 kg |
| Antenna Impedance | 50 Ohms |
Guidance on selecting a convenient and non-obstructive mounting spot for the transceiver within a vehicle.
Steps for securely mounting the transceiver bracket and making proper electrical connections to the vehicle.
Explanation of common sources of electrical noise in vehicles and methods to mitigate its impact on reception.
Discussion on antenna types, their characteristics, and vehicle mounting for optimal performance and range.
Detailed procedure for adjusting antennas to achieve the best Standing Wave Ratio (SWR) for efficient transmission.
Overview of the 18 controls and 4 indicators located on the transceiver's front panel.
Explanation of the function of primary front panel controls like Volume, Squelch, and Gain adjustments.
Description of the power supply input, external speaker jack, and antenna connector on the rear panel.
Explanation of the function of the push-to-talk switch for activating the transmitter and receiver.
Step-by-step guide on how to properly set up and operate the transceiver for receiving signals.
Step-by-step guide on how to properly set up and operate the transceiver for transmitting signals.
Detailed explanation of how to receive and tune Single Sideband (SSB) signals for clear communication.
Explanation of the automatic audio signal transmission at the end of a transmission for listener notification.
Guidance on selecting and installing compatible microphones, including wiring details for alternate types.
Outlines general technical details including channels, frequency range, power, dimensions, and weight.
Details transmitter performance metrics like power output, modulation capabilities, and distortion levels.
Details receiver performance metrics such as sensitivity, IF frequency, and audio output characteristics.
To Next Page
