4
||
midlandusa.com
3. Turn the radio on.
4. Double click on the icon to open the MB400 programming software.
1. Turn the MB400 radio off.
2. Connect the MB400 radio to your computer using the MPC400 programming cable.
a. You will hear “Midland Ready” with the channel number announcement.
a. Remove the accessory jack cover from the radio.
b. Connect the small jack on the programming cable to the small socket (microphone) on the radio.
c. Connect the USB plug of the programming cable to a USB port on your computer.
Speaker / Microphone
Jack Cover
Connect to
microphone
jack on the radio
Connect to a
USB port on
your computer
PROGRAM A MB400 RADIO
To Next Page
Loading...
