Midland BT-Intercom - Page 12

4 H E  7 O R L D  I N  # O M M U N I C A T I O N
4 H E  7 O R L D  I N  # O M M U N I C A T I O N
4 H E  7 O R L D  I N  # O M M U N I C A T I O N
4 H E  7 O R L D  I N  # O M M U N I C A T I O N
Midland BT Intercom |
ENGLISH
Device for the passenger
Intercom always on
The intercom function can be activated by voice (Vox) or also manually, simply short
pressing the Control button from the passenger unit.
If the intercom is manually activated, the communication between the driver and
the passenger is always open.
• Shortly press the Control button to activate the intercom permanently.
A single beep sound will conrm it.
• Shortly press again the Control button to activate the intercom by voice (VOX).
Two beeps sound will conrm it.
The Intercom is factory preset in voice activation (VOX) mode. The manual activation
(always on) can be done only from the passenger unit. If the passenger unit is
switched off or the intercom communication is closed by an incoming phone call
on the Driver unit, the intercom activation is switched back to the voice activation
mode. To activate again the permanent mode, shortly press the Control button on
the passenger unit.
ATTENTION:
The pilot and passenger devices must be paired. Please
refer to the dedicated section on page 4 of the BT-
INTERCOM user manual.
CTRL button