Midland BT-Intercom - Page 9

8
LIGHT AND SOUND SIGNALS – DRIVER’S UNIT
LED indication Status
None Headset switched off
Triple
blueflas Headset being turned on
Triple
redflas Headset being turned off
Singleblueflas every3seconds Standby (not on a call)
Doubleblueflas every3seconds Active (on a call or initiating a connection)
Rapidred-bluealternatingflas  Pairing mode
Singleredflas every3seconds Low battery while in stand-by
Doubleredflas every3seconds Low battery while a call in progress
Steady red Charging
Steady red turns off Fully charging
Audio signals Status
Ascending tone (low-high) Headset being turned on
Descending tone (high-low) Headset being turned off
1 tone Toggle VR feature on
2 tones Toggle VR feature off
2 beeps Intercom in stand-by mode
LIGHT AND SOUND SIGNALS – PASSENGER’S UNIT
LED indication Status
None Headset switched off
Singleblueflas every3seconds Headset being turned on
Rapidred-bluealternatingflas Pairing mode
Singleredflas every3seconds Low battery while in stand-by
Doubleredflas every3seconds Low battery while a call in progress
Steady red Charging
Steady red turns off Fully charging
Audio signals Status
2 beeps Intercom in stand-by mode
Intercom activation mode 2 tone = enable by VOX / 1 tone = intercom always on