EasyManua.ls Logo

Midland ENERJUMP MINI - Safety Instructions and Warnings; General Safety Precautions

Midland ENERJUMP MINI
48 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8
ENGLISH
SAFETY INSTRUCTIONS / WARNINGS
 
Charge ENERJUMP MINI fully prior to use.
WARNING: Keep the unit clear of re and water.
WARNING: Shock Hazard. Keep away from children. Do not in-
sert foreign objects into the jumper cables port/jack, the USB
output port, or the DC input jack. Do not open Enerjump Mini.
WARNING: Explosion Hazard. Do not use this product where
there are ammable fumes or gases, such as in the bilge of a
gasoline-powered boat, or near propane tanks.
WARNING: Fire Hazard. Do not crush or puncture Enerjump
Mini. Do not short circuit cables.
Always disconnect the clamps from Enerjump Mini after each
use and store separately. The jump start feature is designed
for short term operation only (not more than 3 seconds). Allow
Enerjump Mini to cool down for at least 1/2 minutes after each
jump start attempt.
Do not touch cables immediately after use, they could be
overheated.
Do not jump start more than 3 times in a row.
Remove the product from the vehicle battery.