14
CHARGING A MOBILE DEVICE WITH USB PORT
• Plug the USB cable to the USB Quick Charge 5V/9V output port
of Enerjump Mini.
• Should the supplied USB cable be not compatible with your
device, use your own recharging cable.
• Push the
key to turn on ENERJUMP MINI. The charging lights
will be on when charging.
LED FLASHLIGHT
modes in sequence (normal, strobe, SOS, off).
TECHNICAL SPECIFICATIONS
Size 170x81x17mm
Weight 250g
Charging hours About 2h
Nominal capacity 6000mAh
Input 5V-2A
Output 5V – 2.4A / 9V – 2A
Car starter 12V
Starting current 150A
Peak current 300A
Temperature range -10°C / +60°C
For information about the warranty please visit:
www.midlandeurope.com.
The product complies to CE and is free use in all EU countries.
To Next Page
Loading...