Midland ER300 - Operating the ER300 Radio; Basic Radio Operations; Advanced Features

12 | Midland ER300
Operating the Radio
Turning the ER300 On/Off & Selecting a Band
To turn the radio on, press the BAND button. To cycle through AM or FM press
the BAND button again.
To turn the radio OFF, press and hold the BAND button for 2 seconds.
Adjusting the Volume
To adjust the volume, press the UP/DOWN/VOLUME control buttons.
Tuning the Radio
Press the BAND button to cycle through AM or FM.
Once you are on the desired radio band, you can tune to the desired station
with the TUNE UP/DOWN buttons. For best FM reception, fully extend the
telescopic antenna and rotate until reception is clear.
Setting the Clock
To set the clock, keep pressed the MENU button and select the 24 hour or 12
hour clock with the TUNE buttons.
Press the MENU button to adjust the time and again to adjust the minutes.
Backlight Option
The ER300 has 3 backlight settings:
• OFF: The backlight will always be off.
• ON: The backlight will always be on.
• 5: The backlight will turn on for 5 seconds when a button is pressed then
turn off.
LED Flashlight
The ER300 has 2 flashlight brightness settings:
• Dim: The first press of the flashlight button
will enable the dim setting.
• Bright: The second press of the flashlight button
will enable the bright
setting.