- 8 -
3. TECHNICAL DATA OF THE MODEL 610
ENGINE: petrol HONDA GX 200 K1
ENGINE CAPACITY: 4.8 kW (6.5 HP)
ENGINE FILTER: dry filter
WORKING WIDTH: 60 cm
CUTTING HEIGHT: adjustable 20 - 80 mm
CUTTING SYSTEM: 32 flail rotor
SPEED GEARS: 2 forward gears – 2 reverse gears
TRASMISSION: mechanical
GEARS: in oli bath
SPEED: forward (1) 1.80 km/h (2) 3.30 km/h
reverse (1) 1.80 km/h (2) 3.30 km/h
WHEEL RELEASE MECHANISM: mechanical
START: recoil
SERVICE BRAKE : on wheel axle
ROTOR BRAKE : on rotor drive
HANDLEBARS: height-adjustable
TYRES: Tractor 13 x 5.00-6
SIZE L x W x H (mm): 1400 x 660 x 800
WEIGHT (kg): 120
ACOUSTIC PRESSURE, measured according to EN 12733 : 89 dBA
ACOUSTIC POWER, measured according to EN 12733 : LWA 98 dBA
HANDLEBAR VIBRATION ( EN 12 733) AW : 1,88 m/s²
Environmental conditions
Unless otherwise stated at the time of ordering it is understood that the machine is to work
normally in the environmental conditions covered by the following points.
Environmental conditions other than those described may cause mechanical breakage
resulting in the creation of dangerous situations for persons.
To Next Page
Loading...