Model GXT5000 Series
Page 13 www.midlandradio.com
Pls. note that the DUAL WATCH function is only available as a MENU
selection if the OUT-OF-RANGE is turned off.
To confirm, press the PTT button or press MENU.
The “DW” icon will appear all the same time to signify that the DUAL
WATCH function is on and the radio will start to scan both the current
channel/code-in-use and the selected channel/code. It will stop scanning
on a channel if either is active. Your radio will resume scanning after 4
seconds when the channel is no longer active.
When you press the PTT button to transmit on an active channel, the
scanning function will stop and remain on the active channel for 5 seconds
before resuming scan when PTT button is no longer pressed.
To resume scanning, quickly press the button.
To turn the DUAL WATCH function off, press the SCAN button.
Please note that the DUAL WATCH function is only available
as a MENU selection if the OUT-OF-RANGE is turned off.
EXTERNAL SPEAKER/MICROPHONE JACK
Your GXT5000 Series can be used with an optional
external speaker/ microphone or headset, freeing your
hands for other tasks. To use an optional speaker/
microphone or headset:
l Cover must first be removed. Loosen the screw
and remove the Cover.
l Insert the plug(s) into the SPK/MIC jacks
l Place the earbud into your ear, and adjust
the mic into your desired position.
Note : The radio will no longer be water
proofed when the accessory jack cover is
removed.
To Next Page
Loading...
Need help?
General
