ROGER BEEP (end of transmission) TONE
When the PTT button is released, the radio will beep to confirm to
other users that your transmission has finished.
To turn the ROGER BEEP tone on, press the MENU button until the
display shows an “rb” icon while on the right of the “rb” display, an
“oF” icon appears. Select “on” by pressing the buttons and push
the PTT key, or press MENU button to move to the next feature
setting.
To turn the ROGER BEEP tone off, press the MENU button until the
display shows an “rb” icon while on the right of the “rb” display, an
“on” icon appears. Select “oF” by pressing the buttons and push
the PTT key, or press MENU button to move to the next feature
setting.
CALL
ALERT SELECTION
Your GXT600/635 Series has 5 selectable CALL ALERTS (10 for
GXT650/656). To select, press the MENU button until a “CA” icon
appears and to the right of the “CA” icon the current CALL ALERT
setting is displayed. Then press the buttons to make the CALL
ALERT selections, the radio will emit a corresponding tone for each
selection. To confirm, press the PTT button or press MENU button to
move to the next feature setting.
Note : GXT650/656 has 5 additional “Animal Sound” CALL
Alerts - duck, goose, turkey, owl, and elk.
To Next Page
Loading...
Need help?
General
