Page 12
midlandusa.com
Model GXT67 Pro
Weather Modes Navigation
Weather Scan Mode
1. The radio will stop scanning on the first usable signal in your area and
you will hear the NWR broadcast on that WX Channel.
2. The radio will automatically rescan if the Weather Channel signal
becomes too weak. If you want to manually restart a Scan for a another
Weather Channel signal, press the Up or Down button.
Manual WX Channel Selection
1. Use the Up or Down button to select the desired Weather Channel
(see guidance for selecting a Weather Channel above). You will hear the NWR
broadcast on that WX Channel.
Weather Alert On / Off Selection
1. Use the Up or Down button to select
Weather Alert On (enabled) or Weather Alert Off (disabled).
Weather Alerts
When On / enabled, Weather Alerts can be received in both GMRS and Weather
modes. Upon receiving a Weather Alert.
1. The radio will sound a Weather Alert notification tone sequence,
2. The WX icon will blink rapidly, and
3. The radio will switch to the Weather Channel display
Press any button to acknowledge the Weather Alert and stop the notification tones.
After the Alert is acknowledged, the NWR broadcast will be heard. Use the PTT or
Menu / WX buttons to exit or change the Weather modes.
WX Channel
1~10
WX Alert
On/Off
MENU
Press and hold the
MENU button for
3 seconds
WX Scan
1~10
From GMRS mode, press and hold the Menu / WX
[button graphic] button for 3 seconds to enter Weather
Scan mode. Press Menu / WX again for Manual WX
Channel Selection to set and listen to a selected
Weather Channel. Press Menu / WX again to
advance to Weather Alert On / Off Selection. Pressing
Menu / WX will advance back to the start of Weather
Modes (Weather Scan) and pressing PTT during
Weather Alert selection will go “Back” (to Manual WX
Channel Selection). Pressing PTT during Weather
Scan and Manual WX Channel Selection exits “Back”
to GMRS mode.
▼
▼
▼
To Next Page
Loading...
Need help?
General
