d. press and hold Power Button for 2 seconds to
turn o the camera.
TRANSFERRING FILES TO PC
You can transfer captured videos and pictures to PC.
a. Connect camera and PC via a USB cable;
b. turn the camera on;
c. when the camera monitor shows “MSDC” icon,
it means your camera can be used as a “USB
Disk”. If shows “PC CAM”, press the Shoot But-
ton to switch to MSDC mode;
d. select the les you want to transfer to your
computer.
RESET THE CAMERA
The “Reset” button is near to the USB and TF card
interface.
When the camera does not work properly or is
jammed, you might use pin to press the Reset
Button for 2 seconds to reset the camera, so that
you can restart the camera for proper shooting.
To Next Page
Loading...
