http://www.midlandradio.com - 12 -
Operation
Power On/Off
Press the “Power button” for more than 2 seconds to turn the radio on. Press
“Power button” again for 2 seconds to turn the radio off.
Volume
Press the “Up” button to increase the volume, and press the “Down” button
to decrease the volume during normal operation.
Talking and Listening (Receiving)
To communicate, all radios in your group must be set to the same channel.
For maximum clarity, hold the radio two to three inches from your
mouth.
Press and hold the PTT button and speak in a normal voice into
the microphone. The TX icon appears continuously on the LCD
display when transmitting.
To receive messages, release the PTT button. The RX icon
appears on the display when your radio is receiving a
transmission.
Monitor
To enable the monitor function, hold down the menu button for 2 seconds. To
take the radio off monitor, repeat process.
To Next Page
Loading...
Need help?
General
