Need help?Do you have a question about the Midland M-88 and is the answer not in the manual?
Details on installing the radio's mounting bracket for vehicle placement.
Instructions for attaching the suction cup mount to the vehicle's windshield.
Procedure for replacing blown fuses in the radio.
Connecting the microphone and installing the antenna for optimal performance.
Information on connecting external speakers and impedance requirements.
Explanation of ON/OFF, Volume, MUTE, FN, and EMG/MENU buttons.
Operation of selection keys, arrow keys, and the main selector knob.
Controls for squelch, RF gain, and memory storage/recall (SQ-M1, DS-M2, RFG-M3).
AM/FM selection and understanding LED color codes for status.
Symbols for received signal strength, frequency, and channel number.
Icons for emergency, busy lock out, VOX, keypad lock, and noise filters.
Display of squelch, RF gain, volume, and selected frequency band.
Details on antenna connector, power, and external speaker jacks.
Explanation of PTT, UP, DOWN, and channel memory buttons.
Procedures for turning the radio on/off, adjusting volume, and selecting channels.
How to adjust squelch levels and RF gain for optimal reception.
Switching between AM/FM and accessing emergency channels 9/19.
Procedures for receiving signals and transmitting audio.
How to store, recall, and delete radio memory channels.
Functionality for automatically seeking active channels.
Guide to selecting the correct frequency band for different countries.
Activating keypad lock and noise reduction filters (NB/HIC).
Settings for display/keypad backlight, tones, Roger beep, and auto power.
Configuring scan modes, frequency steps, and dual watch.
Managing emergency functions, PA mode, and VOX sensitivity.
Adjusting mic sensitivity, busy lock out, SWR protection.
Setting CTCSS/DCS codes, viewing firmware version, and factory reset.
To Next Page
General