7
GENERAL OPERATION
1. LCD
2. Mic/Programming Socket
3. Menu
4. Call
5. Function Select
6. Key Lock
7. Mic
8. Priority Channel
9. Monitor
10. Scan
11. T/R LED
12. Speaker
13. Channel Down
14. Power
15. Channel Up
16. PTT (Press to talk)
17. Mic Connector
18. USB Port (Charging)
About Banks
e radio is designed with 2 bands. BANK1 is xed to low power (LCD does not display Lo for 80
UHF/CB channels). e frequency range is: 476.425 - 477.4125MHz. Channels 1-80 are xed for
Australian frequencies. BANK2 450-520MHz LMR frequency for Channels 81-99. ese channels
can be programmed using optional programming soware available to authorised dealers.
ey can also be switched to high and low power (LCD will show Hi/Lo).
BANK1 and BANK2 switching mode: LOCK + MON, the liquid crystal display will show P1
(bank1), P2 (bank2)
Power
To turn on, briey press the key for three seconds.
To turn o, briey press the key for three seconds.
Key Lock
With radio in standby, press for three seconds. en the LCD will display icon.
To unlock press button for three seconds.
To Next Page
Loading...
Need help?
General