Midland MT RIDER SYNC - Control Box Installation; Control Box Mounting

CONTROL BOX
On the rear side of the helmet there’s a
slot suitable for placing the control box.
Installation:
1. unscrew the 2 screws and remove
the cover
2. Insert the control box
3. Close the cover and screw again.
MT-B01 is composed of:
1. speakers
2. control box
3. recharging cable type C
4. keypad
5. wired microphone
6. boom mike
CONTENTS
4.
1.
3.
5.
1.
2.
6.