Midland X-Talker T50 Series - Advanced Radio Features; VOX Operation; Roger Beep Tone; Silent Operation Mode

Model T50 Series
Page 10
midlandusa.com
VOX
Your radio has 3 VOX level settings: (oF/1~3).
To set VOX, press the MENU button until the display shows “VOX”.
On the right of the CHANNEL NUMBER display, an “oF” icon
appears. Select “1” ~ “3” by pressing the

\

buttons and push the
PTT key, or press the MENU button again to move to the next feature
setting. VOX will be more sensitive on the lower setting than on the
higher setting.
To turn VOX off, press the MENU button until the display shows
“VOX”. On the right of the CHANNEL NUMBER display, a “1” ~ “3”
icon appears. Select “oF” by pressing the

\

buttons and push the
PTT key, or press the MENU button again to move to the next feature
setting.
ROGER BEEP (end of transmission) TONE
When the PTT button is released, the radio will beep to confirm to
other users that your transmission has finished.
To set the ROGER BEEP tone, press the MENU button until the
display shows an “rb” icon. Select “on” or “oF” by pressing the

\

buttons and push the PTT key, or press the MENU button to move to
the next feature setting.
SILENT OPERATION
Your radio has a SILENT OPERATION mode. In this mode, all
“beeps” and “tones” are disabled.
To set SILENT OPERATION, press the MENU button until the display
shows a “bP” icon. Select “on” or "oF" by pressing the

\

buttons
and push the PTT key or MENU button.