1
003-1506-00 Rev. E
Manual Exam Table Installation
Applies to Models:
204 (all)
604 (all)
Language of origin: English
Shipping Bracket
Paper Roll Rod
Equipment Alert
When moving the table, you must adhere to the following instructions.
NEVER: a) use stirrups to lift table
b) lift table by upholstered top
Caution
The table weighs approximately 220 lbs (100 kg).
Use an assistant when moving table.
Step 1: Remove table from skid.
A) Remove bolts and two shipping brackets.
B) Remove table from skid*.
C) Move table to desired location.
*Note: Prevent damage to floor by placing cardboard / blanket under table.
ATTENTION!
Each table is shipped with a paper roll rod.
The installation instructions are packaged with
the upholstered top. DO NOT DISCARD THE ROD!
To Next Page
Need help?
General
