Rinse aid indicator
When the rinse aid indicator first comes
on, there will be enough rinse aid left
for 2 - 3 washes.
^ The rinse aid indicator on the control
panel will light when the rinse aid
reservoir needs refilling.
Adjusting the dosage
The dosage selector is preset to 3. This
dispenses approximately 3 ml of rinse
aid per program. It can be adjusted
from 1 to 6.
–
Use a higher setting if spots appear
on dry glassware.
–
Use a lower setting if streaking
appears on dishes or glasses.
^
Turn the dishwasher off "s".
^
Turn the program selector to the
12-o’clock position.
^ Press the "Start/Stop" button and at
the same time turn the dishwasher
on s. Hold the "Start/Stop" button
until the "Start/Stop" indicator comes
on.
If it doesn’t come on, start over.
Before using for the first time
12
To Next Page
Loading...