Factory default
All settings can be reset to the factory
default setting.
^
Turn the dishwasher off s.
^
Turn the program selector to the
12-o’clock position.
^
Press the "Start/Stop" button and at
the same time turn the dishwasher on
s. Hold the "Start/Stop" button until
the "Start/Stop" indicator lights.
If it doesn’t come on, start over.
^
Turn the program selector to the
11-o’clock position.
The "Rinse" indicator does not light.
^ Press the "Start/Stop" button.
The "Rinse" indicator flashes once in
intervals.
^ Turn the program selector to the
9-o’clock position.
The "Rinse" indicator shows if a setting
was changed.
–
The "Rinse" indicator flashes:
All settings are default settings.
–
The "Rinse" indicator is off:
At least one setting was changed.
^
To reset the dishwasher to the default
settings, press the "Start/Stop" button.
^
Turn the dishwasher off s.
Additional functions
28
To Next Page
Loading...