Turning on
^
Make sure the spray arms can rotate
freely.
^
Close the door.
^
Open the water supply, if it is closed.
^
Turn the dishwasher on s.
The "End" indicator lights when the
program selector is not pointing to a
program.
Selecting and starting a
program
Choose your program according to the
type of load and soiling. See the
"Program Guide" for more information.
^
Turn the program selector clockwise
or counterclockwise to the desired
program.
The "Start/Stop" indicator flashes.
^
Press the "Start/Stop" button.
The program starts. The "Start/Stop"
and "Rinse" indicators light.
Cancel a program only in the first
5 minutes. Otherwise important
program steps could be interrupted.
Program sequence indicators
After a program has been started the
current stage of the program is
indicated by the program sequence
indicators.
Use
25
To Next Page
Loading...