EasyManua.ls Logo

Miele B 2312 - Electrical Connection and Technical Data

Miele B 2312
76 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Electricalconnection
Allelectricalworkshouldbecarriedout
byasuitablyqualifiedandcompetent
personinstrictaccordancewithcurrent
localandnationalsafetyregulations.
Beforeconnectingtheappliance,make
surethattheconnectiondataonthe
dataplate(voltageandratedload)
matchesthemainselectricitysupply.
Ifindoubt,consultaqualified
electrician.
Thedataplateislocatedinthetower,
behindthewatercontainer.
Thisapplianceissuppliedwithamains
cableandmouldedplugreadyfor
connectiontoaACsinglephase
220-240V50-60Hzsupply.
Thevoltageandfrequencyaregivenon
thedataplate,locatedinthetower
behindthewatercontainer.Please
ensurethesematchthehousehold
mainssupply,andcontactaqualified
electricianifindoubt.Thefuseratingis
quotedontheplug.
Connectionshouldbimadeviaa
suitableswitchedsocketwhichiseasily
accessible.Forextrasafteyis
advisabletoinstallasuitableresidual
currentdevice(RCD).
Donotconnecttheappliancetothe
mainselectricitysupplybyaextension
leadoraplugadapter.Extensionleads
donotguranteetherequiredsafetyof
therappliance(e.g.dangerof
overheating).
Forextrasafetyandprotectionwe
recommendconnectingtheappliance
viaa30mAresidualcurrentdevice
(RCD).
Iftheelectricalconnectioncableis
faultythismustonlybereplacedbya
suitablyqualifiedandcompetent
person.
Theappliancemustnotbeconnected
tothe inverter ofanautonomouspower
supply,e.g.asolarpowersystem.
Whenswitchingtheapplianceon,a
surgeinthepowercouldtriggerthe
safetycut-outmechanism.Thiscould
damagetheelectronicunit.
Theappliancemustnotbeusedwith
so-called energysavingdevices.
Thesereducetheenergysupplytothe
appliancewhichcouldthenbecome
toowarm.
Ifmainsconnectioncableisdamaged,
itmustbereplacedwithaMielecable
byaMieleapprovedservicetechnician
only.
WARNING
THISAPPLIANCEMUSTBE
EARTHED
Electricalconnection
71

Related product manuals