Select the temperature for ironing
(when ironing with steam)
^
Turn the temperature selector to
ßßß Linen / Cottons (high
temperature).
Settings ß and ßß are not hot enough
for ironing with steam.
Switching the steam on and off
Set the temperature to ßßß, before
selecting steam.
The Q "Steam" button is used for
switching steam on and off.
To switch on
^
Press the Q button in
- once the required temperature has
been reached in the heater plate the
indicator light next to the button will
come on.
If the water reservoir becomes
empty during operation, the Q
"Steam" indicator light will go out
and the a"Water reservoir empty"
indicator will light up red.
If the water reservoir is not filled
while the steam setting is activated,
the Q "Steam" and a "Water
reservoir empty" will flash alternately
every few minutes.
To switch off
^
Press and release the Q button
- the indicator light next to the button
will go out.
Ironing
19
To Next Page
Loading...
