Back
Iron the back in two sections, from the
middle to the side seams.
^ Pull the shirt over the roller as far as
the yoke seam - or to the collar seam
on shirts without a yoke - and smooth
it out.
^
Iron from the middle of the back to
the armhole seam. Then iron the rest
of the back as far as the side seam
together with the front section.
Iron the second part of the back as the
first section, but with the shirt inside
out.
Front
The fronts are ironed in one pass
together with the lower section of the
back up to the armhole seam.
^
Start with the front left.
^ Smooth the shirt out and then iron
from the armhole to the collar.
^ Turn the shirt inside out to iron the
other side.
Ironing tips
27
To Next Page
Loading...
