If the milk pipe is blocked, clean it
under running water with the brush
supplied:
^
Insert the brush in the tube and move
it back and forth as far as it will go
until all milk residue has been
removed.
^
Fit the dispensing unit back together.
^
Push the dispensing unit back onto
the central spout. Press firmly to
ensure the spouts at the bottom
connect correctly with the edge of
the dispenser.
^ Replace the stainless steel cover and
connect the milk pipe if applicable.
Milk flask
The milk flask should be taken apart
and cleaned every day.
^
Clean all parts by hand only using
hot water and a little washing-up
liquid. Use the cleaning brush
supplied to remove milk residue from
the milk pipework if necessary.
^
Rinse all parts carefully under
running water. Residual washing-up
liquid can affect the taste of milk from
the machine and the quality of the
milk froth. Dry all parts afterwards.
^ Reassemble the milk flask.
Cleaning and care
51
To Next Page
Loading...
