Unpacking and installing
21
– The appliance door must be opened
completely to remove the brew unit.
Place the coffee machine in the
location you want to use it.
Clean the appliance thoroughly
before filling it with mains tap water
and coffee beans.
Insert the plug of the coffee machine
into the socket (see “Electrical
connection”).
Remove the water container and fill it
with fresh, cold tap water. Only fill the
water container up to the “max.”
marker and then refit it in the
machine.
Take the lid off the coffee bean
container, fill it with roasted coffee
beans and replace the lid.
Tip: The milk pipework can be stored
behind the service panel when not in
use.
To Next Page
