Cleaning and care
73
Cleaning the central spout with
integrated cappuccinatore
With the exception of the stainless steel
cover, all parts of the central spout
should be cleaned in the dishwasher at
least once a week. This will remove
coffee deposits and milk residues
effectively.
Clean the central spout stainless cover
by hand only using warm water and a
little washing-up liquid.
Start in the Drinks menu.
If the central spout is in the uppermost
position it cannot be dismantled. The
central spout must be moved into the
maintenance position to do this.
Touch for 3 seconds.
The central spout will move into the
maintenance position.
Carefully pull the stainless steel cover
off.
Remove the dispensing unit to the
front.
Twist off the upper section with the
holder for the milk pipework and
pull it off. Then pull the Y-shaped
piece off. Remove the dispensing
spouts .
Clean all parts thoroughly.
To Next Page
Loading...
