Switching on and off
31
Switching the coffee machine
on
Touch the On/Off sensor.
The machine heats up and rinses the
pipework. Hot water will run out of the
central spout.
You can now make drinks.
If the coffee machine is already at
operating temperature, rinsing will not
take place.
Switching the coffee machine
off
Touch the On/Off sensor.
If coffee has been dispensed, the coffee
machine will rinse the coffee pipework
automatically before switching off.
Switching off for longer
periods of time
If the coffee machine is not going to be
used for a longer period of time, e.g. if
you are going on holiday:
Empty the drip tray, the waste
container and the water container.
Clean all parts thoroughly, including
the brew unit.
Switch the machine off and withdraw
the plug to disconnect it from the
power supply.
The time of day set will be saved for a
maximum of ten days and after that
must be reset. Timer settings, profiles
and other settings will be kept.
To Next Page
Loading...
