Using for the first time
18
Before using for the first time
Remove any protective foil and no-
tices from the machine.
Insert the drip tray into the lower
panel.
Place the coffee machine on a flat
surface that is not sensitive to water
(see "Installation").
Clean the machine thoroughly before
filling it with water and coffee beans
(see "Cleaning and care").
Insert the plug of the coffee machine
into the socket (see "Electrical con-
nection").
Remove the water container and fill it
with cold fresh water to the "max."
mark. Place it back in the machine
(see "Filling the water container").
Remove the bean container lid, fill it
with roasted coffee beans and re-
place the lid (see "Filling the bean
container").
Switching on for the first time
When you switch the coffee machine on
for the first time, after the welcome
screen has appeared you will be
prompted to set the following:
– Language and country
– Time of day
Touch the On/Off sensor.
The welcome message Miele - Willkom-
men will appear in the display briefly.
Select language
Use the arrow sensors to high-
light the required language.
Touch OK.
Use the arrow sensors to high-
light the required country.
Touch OK.
The setting is now saved.
Setting the time
Use the arrow sensors until the
current time of day appears.
Touch OK.
The setting is now saved.
The coffee machine is now set up for
use. It will heat up and rinse the pipe-
work. Water from the rinse process will
come out of the central spout.
Rinse the milk pipework (see "Rinsing
the milk pipework") before making
drinks with milk for the first time.
Please note that the full aroma of the
coffee and typical crema will not de-
velop fully until several coffees have
been made.
To Next Page
Loading...
