Miele Complete C2 Flex User Manual

en
38
Clean even hard floors which are not
susceptible to scratching, as well as
flooring with gaps or deep crevices in it
with the brush protruding:
 Press the footswitch.
Vacuum carpets and rugs with the
brush retracted:
 Press the footswitch.
If the suction power of the adjustable
floorhead seems too high, reduce the
suction until the floorhead is easier
to manoeuvre (see “Use” – “Regulat-
ing the suction power”).
Adjustable floorhead (Fig. 20)
The adjustable floorhead can also be
used for vacuuming the stairs.
 Risk of injury caused by falling
vacuum cleaner.
You may be injured if the vacuum
cleaner should fall from the stairs.
When vacuuming stairs, it is best to
start at the bottom of the stairs and
move upwards.
Unwinding the mains cable (Fig. 21)
 Pull the mains cable out to the re-
quired length.
 Insert the plug into the socket.
 Risk of damage due to overheat-
ing.
The mains cable may overheat after
a long period of use.
If vacuuming for longer than
30minutes, the cable must be pulled
out all the way.
Rewinding the cable (Fig. 22)
 Switch off at the wall socket and un-
plug it.
 Press the rewind foot switch. The
cable will rewind automatically.
Switching on and off (Fig. 23)
 Press the On/Off footswitch.
Regulating the suction power
(Fig. 24)
The suction power can be regulated to
suit the type of flooring being cleaned.
Reducing the suction power reduces
the amount of effort required to man-
oeuvre the floorhead.
The vacuum cleaner has symbols on
the controls which indicate the type of
use the power levels are suitable for.
 Curtains, fabric
 Upholstery, cushions
 Cut pile carpets, rugs and runners
 Energy-saving vacuuming. This
setting is also very quiet
 Loop pile carpet and rugs
 Hard floors and heavily soiled
carpets and rugs
When using the adjustable floorhead,
if the suction seems too high, reduce
the suction power until the floorhead
is easier to manoeuvre.
 Turn the suction power selector
manually to the power level you re-
quire.

Miele Complete C2 Flex Specifications

General

Vacuum brushes included	Universal brush
Upholstery nozzle included	Yes
Power source	AC
AC input voltage	220-230 V
Maximum input power	890 W
Annual energy consumption	22.7 kWh
Type	Cylinder vacuum
Hose length	2 m
Cleaning type	Dry
Dust capacity	4.5 L
Product color	Black
Dust container type	Dust bag
Proper use	Home
Noise level	80 dB
Cleaning surfaces	Bare floor, Carpet, Hard floor, Stair steps, Upholstery
Vacuum air filtering	Air-clean
Dirt separating method	Filtering
Cord length	6.5 m

Weight and Dimensions

Depth	275 mm
Width	487 mm
Height	227 mm
Weight	6900 g
Package width	590 mm
Package height	380 mm
Package weight	9600 g