Miele Complete C2 Flex User Manual

en
43
b AirClean Plus50 (light blue)
c Active AirClean50 (black)
d HEPA AirClean50 (white)
Do not use more than one exhaust
filter at a time.
When changing the filter, please note
1. If you wish to replace exhaust filter a
with filter b, c or d, it is essential that
you remove the filter grille before you
fit the new exhaust filter.
If you are using exhaust filter c or d,
you must also activate the timestrip®
filter change indicator(Fig. 12).
2. If you wish to replace exhaust filter b,
c or d with filter a it is essential that
filter a is fitted in the filter grille*(Fig.
34).
* Filter grille – see “Optional ac-
cessories”
Replacing the thread lifters
(Fig. 37 + 38)
(not possible on EcoTeQ Plusfloor-
heads)
The thread lifters on the suction inlet to
the floorhead can be replaced. Replace
the thread lifters if the pile has worn
down.
 Lever the thread lifters from the slots.
To do so use a suitable tool, e.g. a flat
blade screwdriver.
 Fit new thread lifters.
Replacement parts are available from
your Miele dealer or from the Miele
Spare Parts Dept.
Cleaning and care
 Risk of electric shock from mains
voltage.
The mains voltage is applied to the
appliance even if it is switched off.
Before cleaning, switch the appli-
ance off at the wall socket and un-
plug it.
Vacuum cleaner and accessories
 Risk of electric shock from mains
voltage.
If moisture gets into the vacuum
cleaner, there is a risk of electric
shock.
Do not let the vacuum cleaner get
wet.
The vacuum cleaner and all plastic ac-
cessories can be cleaned with a propri-
etary cleaner suitable for plastic.
 Damage due to unsuitable clean-
ing agents.
All surfaces are susceptible to
scratching. Contact with unsuitable
cleaning agents can alter or discol-
our the external surfaces.
Do not use abrasive cleaning agents,
glass cleaning agents, all-purpose
cleaners or oil-based conditioning
agents.
Dust compartment
The dust compartment can, if neces-
sary, be cleaned using a dry duster,
brush or, if available, a second vacuum
cleaner to vacuum the dust out.

Miele Complete C2 Flex Specifications

General

Vacuum brushes included	Universal brush
Upholstery nozzle included	Yes
Power source	AC
AC input voltage	220-230 V
Maximum input power	890 W
Annual energy consumption	22.7 kWh
Type	Cylinder vacuum
Hose length	2 m
Cleaning type	Dry
Dust capacity	4.5 L
Product color	Black
Dust container type	Dust bag
Proper use	Home
Noise level	80 dB
Cleaning surfaces	Bare floor, Carpet, Hard floor, Stair steps, Upholstery
Vacuum air filtering	Air-clean
Dirt separating method	Filtering
Cord length	6.5 m

Weight and Dimensions

Depth	275 mm
Width	487 mm
Height	227 mm
Weight	6900 g
Package width	590 mm
Package height	380 mm
Package weight	9600 g