Wooden worktops
^
Position the spring clamps supplied
a and spacer bars b on the top
edge of the cut-out in the positions
marked.
^
Secure the spring clamps and
spacer bars with the 3.5 x 25 mm
screws supplied.
Granite and marble worktops
The screws are not required for
granite or marble worktops.
^
Position and secure the spring
clamps a and spacer bars b using
strong, double-sided adhesive
tape c.
Fitting the spring clamps and spacer bars
43
b
25-30
a
25-30
a
c
b
c
To Next Page
Loading...
