Auto heat-up
Continued
cooking setting
Heat-up time
in minutes and
seconds (approx.)
1 0:15
2 0:15
3 0:25
4 0:50
5 2:00
6 5:50
7 2:50
8 2:50
9-
When Auto heat-up has been activated,
the cooking zone switches on
automatically at the highest setting and
then switches to the continued cooking
setting which you have previously
selected. The heat-up time depends on
which continued cooking setting has
been chosen (see chart).
As the higher continued cooking
settings are generally used for frying
food, only a relatively short heat-up time
is needed to heat up the pan initially.
Taking a pan off the zone whilst Auto
heat-up is in operation interrupts the
Auto heat-up. It will resume if a pan is
placed back on the zone within 3
minutes.
Activating Auto heat-up
^
Turn the control anticlockwise as far
as it will go and hold in that position
until A appears in the display.
If you hold the control for too long, L
will appear in the display which
means that the lock has been
activated (see "Safety features -
Safety lock").
^
Turn the control clockwise to the
continued cooking setting required.
Auto heat-up will not be activated if you
do not select a continued cooking
setting within 5 seconds.
The continued cooking setting can only
be altered during the first 10 seconds
(approx.) after activating the Auto
heat-up function. At the end of this time,
changing the continued cooking time
will switch the Auto heat-up function off.
An A lights up in the display during the
Auto heat-up phase.
Operation
23
To Next Page
Loading...
Need help?
General