Cappuccino and milk froth
Using for the first time
Before the coffee machine leaves the factory, the pipework is
completely pumped out. For this reason, water must be
pumped into the pipework before using the machine to make
a cappuccino or to froth milk for the first time:
^ Place an empty cup under the Cappuccinatore spout.
^ Touch the sensor beside "Froth".
The Cappuccinatore will now draw water in for a while in
order to fill the pipework. A trickle of water will come out of
Cappuccinatore spout.
^ Once the machine has stopped, start the "Froth" process
again
After a while steam will come out of the Cappuccinatore
spout and there will now be water in the system. You can now
prepare a cappuccino or froth milk.
Making coffee
24
To Next Page
Loading...
