Miele CVA 4085 - Selecting or Altering a User Profile

To set the correct water hardness level,
^
touch the sensor beside "Settings".
Settings
ß Total no. of coffees
ß System lock
ß Water hardness
^
Touch the sensor beside "Water hardness".
^
Touch the upper or middle sensor on the right until the
correct water hardness is visible on the left of the display.
^
Touch the sensor beside the correct water hardness.
A tick will appear beside the water hardness which is
currently set.
^ Touch the sensor beside "ok" to save the setting.
Selecting or altering a user profile
To cater for different tastes and preferences, you can enter up
to 10 individual user profiles and also allocate different
settings for amount of coffee, temperature, pre-brewing
and portion size to them later (see "Setting the portion
sizes").
To set a User profile,
^
touch the sensor beside "Settings".
Settings
ß System lock
ß Water hardness
ß User profile
^
Touch the sensor beside "User profile".
A tick will appear beside the user profile which is currently
set.
The Standard profile is allocated with standard settings.
Settings: Customising your machine
44