Create
To create a new User profile,
^
Touch the sensor beside "Set".
^
Touch the middle sensor on the right or left of the display
until the first letter is highlighted. Then touch the sensor
beside "Select character".
^
Repeat this step until the name you want for the new User
profile appears in the display.
To delete a letter or number,
^
touch the sensor beside "Delete character".
The last letter or number will be deleted.
To save the name,
^ Touch the sensor beside "ok".
If you do not wish to save the name,
^ touch "+ C".
Delete
If you want to delete the User profile completely,
^ touch the sensor beside "Delete".
^
Touch the sensor beside the name you want to delete.
^
Touch the sensor beside "ok".
As a safety measure, you will be asked if you are sure you
want to delete the name.
^
Touch the sensor beside "Yes" if you are sure that you want
to delete the selected name.
The name you have selected will be deleted from the list.
Change name
^
If you want to change a name, touch the sensor next to
"Change name" and touch the sensor beside "ok".
Settings: Customising your machine
45
To Next Page
Loading...
