Press the e button to set the temperature to mini-
mum, low, medium, high or maximum.
Press ENTER to save this setting, or
turn the program selector to “0ff” to cancel if a
mistake has been made.
This will bring you out of the sub-menu.
Turning the pre-brewing feature on or off
When the pre-brewing feature is turned on, the
freshly ground coffee is first moistened with a little
hot water. Then the remaining water is forced
through the moistened coffee at high pressure. This
pre-brewing process allows the aroma and foam of
the coffee to fully develop.
When the pre-brewing feature is off, the hot water is
forced through the coffee immediately.
Turn the program selector counterclockwise to
“Program mode”.
The appliance is now in programming mode and
will respond according to the symbols shown
under the buttons.
The following will appear in the display window:
Programming the appliance
18
To Next Page
Loading...
