Changing a light bulb
Disconnect the cooker hood from
the mains supply by
– switching it off at the wall socket
and removing the plug (do not pull
on the cable, only on the plug), or
– the mains fuse is withdrawn, or
– the screw-out fuse is removed, (in
countries where this is applicable).
Unscrew the fixing screw on the
glass holder by turning to the right or
left.
When doing this, push the glass
cover upwards so that it does not fall
on the hob surface.
Take off the glass holder.
Then take out the glass cover, guid-
ing it downwards at an angle.
Carefully swivel the light tubes down-
wards and pull out to the front.
Change the light tubes and push
back upwards into place.
Put the glass cover back in place
and secure with the glass holder.
Cleaning and Care
18
To Next Page
Loading...
