Altering the filter operating hours
counter
The operating hours counter for the
grease filter is set to 30 hours. This can
be lengthened or shortened to suit the
type of cooking you do.
You can choose from 20, 30, 40 or
50 hours.
–
Select a short time if you roast or fry
a lot.
–
If you use very little fat for cooking,
select a longer time.
–
If you only cook occasionally, we rec
-
ommend that you select a short time
because grease which has built up
gradually over a long period of time
will harden on the grease filter and
make cleaning more difficult.
^
Press the On/Off touch control to
switch the fan off.
^
Press the run-on option touch control
and the grease filter touch control at
the same time.
The indicator lamp for the grease filter
touch control and one of the – /+ touch
control lamps will flash.
The – /+ control lamps show the time
which has been set:
1st lamp from the left = 20 hours
2nd lamp from the left = 30 hours
3rd lamp from the left = 40 hours
4th lamp from the left = 50 hours
^
Use the – /+ touch controls to select
the desired time.
^
Confirm the selection by pressing the
grease filter touch control.
If the procedure is not confirmed
within 4 minutes of programming the
steps, the cooker hood will automati
-
cally revert to the “old” data.
Operation
14
To Next Page
Loading...
Need help?
General
