Changing a halogen lamp
Disconnect the cooker hood from
the mains supply by
– switching it off at the wall socket
and removing the plug, or
– withdrawing the fuse from the
fused spur connection unit, or
– withdrawing the mains fuse, or
– removing the screw-out fuse, (in
countries where this is applicable).
Exercise caution when changing
halogen lamps. They get very hot
during use and remain hot for some
time after being switched off. Do not
touch the surface directly when
changing a lamp, as grease prticles
from your fingers will adhere to the
surface and damage it. Please fol-
low manufacturer's instructions.
^
Use the lever supplied to pull the
halogen lamp out of its socket.
Take care not to let the lamp fall onto
the hob below.
^ Insert the new halogen lamp into its
socket and carefully push into posi-
tion.
When replacing a defective lamp it
is essential to use exactly the same
type of lamp (see "Technical data"
for lamp specification).
Cleaning and care
18
To Next Page
Loading...
